Shower fittings play an important role in the functioning of the entire structure. Comfort and reliability of use depend on it. It is the basis on which other elements rest. Even if the fittings are invisible, their importance does not decrease.
What is necessary for a shower?
A set of fittings for a shower cabin is necessary for the installation and proper functioning of the entire structure. Many elements are required, including:
- loops;
- plums;
- pens;
- seals, etc.
There are certain requirements for these components that are important to comply with. All parts must meet technical parameters to withstand the applied load. They operate in harsh conditions and must cope with temperature fluctuations and high humidity. Care using household chemicals is also a destructive factor. These conditions must withstand not only shower doors, but also handles, fasteners, and other components.
Purpose and variety of choice
Fittings for sliding shower cabins and swing models successfully cope with the negative effects of high humidity. Taking into account the operating conditions, corrosion-resistant materials are used in manufacturing. They will last for many years, maintaining their original characteristics. To improve the appearance of the shower stall, drains, rods, handles and other components are polished, chrome-plated and painted. Additional processing allows you to extend the service life.
For the shower cabin, you can purchase shower racks, sealing profiles, knob handles and other elements. Their use affects not only the reliability of the operation but also the appearance. The size and shape of the entire structure depend on them. Accessories for shower cabins – rollers, hinges, fittings and other components – are selected by the design of the bathroom. Depending on it, the doors can be hinged or sliding. The second option is the best if you need to save space.
When choosing fittings for shower cabin doors, special attention should be paid to quality. The strength and durability of the structure depends on it. It also affects people’s safety.
Hinges for walls and glass
These are necessary components for shower cabins with a swing door or a sliding mechanism. They are used to fasten glasses together or connect them to a wall. Connectors for shower cabins are used for the same purpose.
The elements in question must meet the following requirements:
- hidden installation;
- aesthetically attractive appearance;
- soft closing;
- easy installation.
A high-quality fastening system securely holds the door walls and cabin frame. To prevent them from damaging the product during installation and operation, additional gaskets made of plastic or rubber are installed.
Thanks to properly selected hinges, a flexible permanent connection between glass and other materials is ensured. Externally, they look like brackets with a built-in rotating mechanism. Loops can be attached in different ways. They are selected depending on the type, thickness of glass and size of the shower cabin.
Profiles designed for glass structures may have different parameters. They differ in shape, have different widths and lengths. Made from materials that can withstand heavy loads.
Hinges for walls and glass
Rollers and roller guides
Wheels designed for shower doors are necessary for the operation of the sliding mechanism. They help the glass panels move along the guides. There are two types of design: tension and eccentric. When choosing, you should choose products with a waterproof bearing. The housing must be cast, wear-resistant and free from defects. When using high-quality rollers, a smooth, even motion “back and forth” is ensured.
Castles
Shower locks are used to keep shower doors closed and protect the area from intruders. They come in different types. They differ in the method of fastening. If you need to choose locks for glass doors for a shower stall, you can take a closer look at the following options:
- Latches. They are attached to the glass using two fastening elements, which are located on different sides of the door. Thanks to the presence of a spring, the locking plate is in an extended state. To open the lock, you need to turn or press the shower handle.
- Locks with cylinder locking. They are installed on glass sheets less than 8 mm thick. This mechanism is used to lock doors with a key. This can be done from any side.
- Screwdriver locks. Mounted on one of the “compartment” type doors. Equipped with a special hook bracket that secures the crossbar. Attached to the glass surface using adhesive or crimp bolts.
- Locks equipped with a locking mechanism. A distinctive feature of the presented products is the presence of an add-on. The installed lock allows you to securely close the door from the inside.
The choice of one option or another depends on individual preferences
Castles
Plums
There are different drains for shower trays. The most common options are the following:
- bottle, which is placed at a fairly high height;
- pipe or elbow, for installation of which you do not need to “raise” the base or pallet;
- drain drain, characterized by an extremely simple design (also suitable for flat surfaces in the absence of a tray).
The type of drain is selected per the design features.
Plums
Mixer and switch handles
Switch handles are selected for shower stalls based on the type of faucet. Single-lever models can move in two planes. When moving up and down, the pressure is adjusted, and left and right – the water temperature. They also differ in shape. Can be controlled manually or react to movement.
Models with two handles are responsible for supplying cold and hot water separately. Therefore, to mix the flows, it is necessary to open both handles of the shower faucet. They are manufactured in two versions: in a cross-shaped form and the form of a flywheel.
This category also includes staples and knobs. Each of them has its advantages and disadvantages. The most popular are knobs, which simultaneously combine a handle and a lock to secure the door. When choosing them, you need to pay attention to the following performance characteristics:
- ease of use;
- compactness, absence of sharp corners;
- reliability of fastenings;
- easy to clean.
In addition to the above, the handles must be combined with the rest of the components.
Barbells
Shower rods come in different types. They differ from each other in appearance and performance characteristics. These products have advantages over standard kits, which include a watering can, hose and fasteners. The presence of a rod for the glass of the shower cabin allows you to easily and securely fix the shower head at the required height, moving it as needed. They come in the following types:
- Without mixer. A fairly common option, characterized by affordability. Installed in a vertical position. To move the watering can in this case, you need to slightly loosen the nut and move the bracket to the required height.
- With fixed overhead shower. These are improved rod models without a mixer. The presented design has 2 watering cans. The top one is stationary. The lower one is removable, mounted on a flexible hose that can be removed for local water supply.
- With mixers. The most practical option with which you can completely equip your bathroom. Buying a faucet and hose separately will cost more. By purchasing a combined option, you can save money.
In the production of shower stall holder rods, corrosion-resistant materials are used. The most reliable models are those made of brass. They are highly durable, durable, do not emit substances harmful to health and do not require special care.
Barbells
